Disabling Automatic Start Of The Simatic Ipc Diagmonitor Management Explorer; Monitoring A Pc Station With A Maintenance Station (For Pcs 7 Only); Additional Information - Siemens SIMATIC IPC427E Produktinformation

Disabling automatic start of the SIMATIC IPC DiagMonitor Management
Explorer
The DiagMonitor monitoring software starts automatically when you log on to your device. The SIMATIC IPC DiagMonitor
Management Explorer configuration tool is then displayed automatically. You can disable this function.
1. Select the "Settings" item in the "Tools" menu of the SIMATIC IPC DiagMonitor Management Explorer configuration tool.
2. Disable the "Start with Windows" option.
3. Confirm your entries.

Monitoring a PC station with a maintenance station (for PCS 7 only)

You can find information on how to monitor a PC station from the maintenance station in the "Configuring the maintenance
stations" chapter of the "Process Control System PCS 7 Maintenance Station" function manual.

Additional information

You can find details about device features in Product Equipment Data (PED) tool (https://www.siemens.com/ped).
You can find up-to-date information and manuals for SIMATIC PCS at:
• SIMATIC PCS neo Technical Documentation (https://support.industry.siemens.com/cs/ww/de/view/109762327/en)
• SIMATIC PCS 7 Technical Documentation (https://support.industry.siemens.com/cs/ww/en/view/109801081)
The After Sales Information System (ASIS) on the topic of "SIMATIC IPC" can be found under the following link:
(http://www.siemens.com/asis)
This entry includes a list of links that provide more information on the topic of "SIMATIC IPC".
In particular, this enables feedback on SIMATIC IPC delivered devices and repairs via the quality control report.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose
use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be
precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any
necessary corrections are included in subsequent editions.
Siemens AG
76181 Karlsruhe
GERMANY
SIMATIC IPC427E/477E
SIMATIC IPC427E/477E
A5E51584612-AA , 01/2022
A5E51584612-AA , 01/2022
23