imilab EC3 Benutzerhandbuch Seite 8

Top View:
The distance between the base plate and the wall should be at least 50mm to allow for a
safety turning distance. Any gap of less than 50mm will result in an obstruction to the
camera's movement.
Waterproofing Kit
The camera has a power supply port and a LAN port. Waterproofing must be done on
both these ports.
1. Wrap the power supply port with the waterproofing tape as shown below.
2. Wrap the LAN port with the waterproofing tape or a waterproofing
sleeve.
The LAN port can be wrapped with the waterproofing tape in the same way as
•
the power supply port.
For instructions on the use of a waterproofing sleeve, visit the IMiLab WeChat
•
account.
8