SPORTSTECH X150 Benutzerhandbuch Seite 29

Step 4
Remove the two pre-installed caps, screws
and washers from the seat post. Now align
the backrest support with the seat post and
A
reinstall the washers. Then insert the screws th-
rough the backrest support and the seat post.
Tighten them and put the caps back on.
Then remove the screw and the washer from
the handle and attach the backrest support.
Re-insert and tighten the screws.
Then align the backrest with the holes in the top
of the backrest support and attach the back-
rest to the backrest support with two (A) screws.
EN
Step 5
Remove the two pre-installed screws and
nuts on the underside of the seat cushion and
set them aside. Align the seat on the triangle
bracket forwards. Screw the bolts with the nuts
through the underside of the triangular bracket
back into the seat and tighten them. Insert the
seat post into the main frame and secure it
Screws & Washers
with the height adjustment knob.
To fix the left and right pedals with straps you
can first distinguish the pedals and straps by
the markings " L " (left) and " R " (right). When
assembling the pedal straps, place the short
end on the inside.
29