Symbols On The Device; Protective Clothing; Description Of The Device; Initial Startup - Kärcher PSW 18-20 Bedienungsanleitung

event of any shipping damage, please notify your deal-
er.

Symbols on the device

General warning symbol
Read the operating instructions and all
safety instructions before operating the
device for the first time.
Wear non-slip, sturdy gloves when work-
ing with the device.
Wear non-slip safety shoes when work-
ing with the device.
Always wear suitable eye protection and
hearing protection when working with the
device.
Do not subject the device to rain or moist
conditions.
Electrical hazard. Keep a minimum dis-
tance of 10 m away from overhead lines
10m
when working with the device.
Danger due to flung objects. Keep spec-
tators, especially children and pets, at
least 15 m away from the work area.
Pull: Quick-release catch
Running direction of the chain

Protective clothing

DANGER
Risk of fatal injury from cut injuries. Wear suitable pro-
tective clothing when working with the device. Observe
the local regulations for accident prevention.
Head protection
When working with the device, wear a suitable safety
helmet that complies with EN 397 and is CE marked.
When working with the device, wear hearing protection
that complies with EN 352-1 and is CE marked.
For protection against flying splinters, wear suitable
safety goggles that comply with EN 166 or are CE
marked. Or wear a helmet visor that complies with EN
1731 and is CE marked.
Protective helmets with hearing protection and a safety
visor are available in specialist shops.
Wear suitable protective gloves with cut protection
equipment that comply with EN ISO 11393-4 and are
CE marked when working with the device.
Wear non-slip safety shoes that meet EN 20345 and are
CE marked when working with the device.

Description of the device

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Chain
1
Guide rail
2
End stop
3
Guide rail pin
4
Bar cover
5
Screw for adjusting the chain tension
6
Chain oil tank cap
7
Upper shaft
8
Twist collar
9
Extension insert
10
Eyelet for carrying belt
11
Lower shaft
12
Handle
13
Battery pack trigger
14
Type plate
15
Trigger
16
Trigger lockout button
17
Carrying belt
18
Allen key for adjusting the chain tension
19
Bar scabbard
20
Chain oil
21
*Battery Pack Battery Power 18V
22
*Quick Charger Battery Power 18V
23
* optional
Rechargeable battery pack
The device can be operated with a 18 V Kärcher Bat-
tery Power battery pack.
If required, the device can be extended with the includ-
ed extension insert.
1. Connect the lower shaft and the extension insert.
Illustration B
2. Connect the upper shaft and the extension insert.
English
Protective gloves
Safety shoes

Initial startup

Installing shaft
19