Kärcher PSW 18-20 Bedienungsanleitung Seite 16

h Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury with a fraction of a sec-
ond.
4 Power tool use and care
a Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any ad-
justments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool acciden-
tally.
d Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous
in the hands of untrained users.
e Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly main-
tained power tools.
f Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
h Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpect-
ed situations.
5 Battery tool use and care
a Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c When battery pack is not in use, keep it away
from other metal objects, like paperclips,
coins, keys, nails, screws or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
d Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medi-
cal help. Liquid ejected from the battery may
cause irritation or burns.
16
e Do not use a battery pack or tool that is dam-
aged or modified. Damaged of modified batter-
ies may exhibit unpredictable behaviour resulting
in fire, explosion or risk of injury.
f Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
g Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the bat-
tery and increase the risk of fire.
6 Service
a Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
b Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
Additional General Safety Instructions
Note
● Regulations may restrict the use of this device
in some regions. Seek advice from your local authori-
ties.
DANGER
result of uncontrolled device movements. Keep body
parts away from moving parts. ● Risk of injury from
hurled or falling objects. Never use the device if there
are persons, in particular children or animals, within a
radius of 15 m. ● No changes may be made to the de-
vice.
WARNING
with these instructions are not allowed to operate the
device. The age of the operator may be limited by local
restrictions. ● You need an unobstructed view of the
work area in order to be able to recognise any potential
dangers. Use the device only under good lighting condi-
tions. ● Before operation, make sure the device, all
control elements, and safety devices are working prop-
erly. Check for loose locks, make sure all protective cov-
ers and handles are properly and securely fastened.
Only use the device when it is in a correct condition.
● Replace any worn or damaged parts before operating
the device. ● Never use the device if the trigger on the
handle does not switch on and off correctly. ● Risk of
kickback due to loss of balance. Avoid an abnormal pos-
ture, keep a stable, safe footing and maintain your bal-
ance. ● Serious injuries due to negligence through
familiarity with the device due to frequent use. ● Imme-
diately stop the device and check for damage or identify
the cause of the vibration if the device has been
dropped, hit or vibrates abnormally. Have damage re-
paired by the authorised Customer Service or replace
the device.
CAUTION
ing protection, strong and sturdy gloves and head pro-
tection when operating the device. Wear a face mask
when the work is dusty. ● Wear long, heavy trousers,
sturdy shoes and well-fitting gloves when working with
the device. Do not work barefoot. Do not wear any jew-
ellery, sandals or short trousers. ● Risk of injury when
loose fitting clothing, hair or jewellery is caught by mov-
ing parts of the device. Keep clothing and jewellery
away from moving parts of the device. Tie long hair
English
● Risk of fatal injury from cuts as a
● Children and persons unfamiliar
● Wear full eye protection and hear-