Technical Data; Declaration Of Conformity - Kärcher PSW 18-20 Bedienungsanleitung

Technical data

Device performance data
Working voltage of the battery
Idle speed
Chain oil tank volume
Cut material diameter (max.)
Working range (max.)
Determined values in acc. with EN ISO 11680-1
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
wA
Uncertainty K
WA
Front handle hand-arm vibration
value
Rear handle hand-arm vibration
value
Uncertainty K
Dimensions and weights
Length x width x height
Guide rail length
Chain pitch
Weight (without battery pack)
Subject to technical modifications.
Vibration and noise value
The declared vibration total values and the declared
noise emission values have been measured in accord-
ance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total values and the declared
noise emission values may also be used in a preliminary
assessment of exposure.
WARNING
The vibration and noise emissions during actual use of
the power tool can differ from the declared values de-
pending on the ways in which the tool is used especially
what kind of workpiece is processed.
Identify safety measures to protect the operator that are
based on an estimation of exposure in the actual condi-
tions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).

Declaration of Conformity

EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Battery-powered saw with extension
Type: 1.444-010.0
22
PSW 18-
20
V 18
m/s 5,5
ml 50
mm 180
m 3
dB(A) 78,4
dB(A) 3
dB(A) 91,6
dB(A) 3
2
m/s 1,3
2
m/s 1,2
2
m/s 1,5
mm 2920 x
188 x 94
mm 200
in 3/8
kg 3,8
English
Currently applicable EU Directives
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Harmonised standards used
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 62841-1:2015 + A11: 2022
EN ISO 11680-1:2011
EN ISO 11680-1:2021
EN ISO 12100:2010
Notified body, 0197 TÜV Rheinland LGA Products
GmbH; Tillystraße 2 D - 90431 Nürnberg, Germany has
carried out EC type approval, registration number: BM
50545272 0001
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/05/01
Declaration of Conformity (UK)
We hereby declare that the product described below
complies with the relevant provisions of the following
UK Regulations, both in its basic design and construc-
tion as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is
modified without our prior approval.
Product: Battery-powered saw with extension
Type: 1.444-010.0
Currently applicable UK Regulations
S.I. 2016/1091 (as amended)
S.I. 2008/1597 (as amended)
S.I. 2012/3032 (as amended)
Designated standards used
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 62841-1:2015 + A11: 2022
EN ISO 11680-1:2011
EN ISO 11680-1:2021
EN ISO 12100:2010
TUV Rheinland UK Ltd. Friars Gate (Third Floor), 1011
Stratford Road. Shirley, Solihull, B90 4BN A UKAS ac-
credited certification body No. 8400 Notified by the Dep-
partment for Business, Energy and Industrial Strategy
(BEIS) UK Approved Body No. 2571.
Certificate number: A6 50545273 0001
The signatories act on behalf of and with the authority of
the company management.