Control Panel; Switching On And Off; Temperature Regulation - AEG AWUS040B8B Benutzerinformation

5.1 Control panel

Cellar Mode key
1
Display
2
Temperature decrease key
3
5.2 Display
A. Alarm indicator
B. Filter reset indicator
C. Temperature indicator

5.3 Switching on and off

To switch on the appliance:
1. Insert the plug into the wall socket.
2. Go to the right side of the control
panel.
3. Tap and hold the Temperature
decrease key and Light key for 3
seconds if the display is off.
4. The display shows the default set
temperature (12°C).
To switch off the appliance, repeat the
above procedure in reverse order.
To select a different temperature, refer to
the "Temperature regulation" section.

5.4 Temperature regulation

The default set temperature
for the wine cabinet is 12°C.
The temperature can be
adjusted between +5 and
+20°C.
1 2
A B
D
D. Child lock indicator
To set the temperature, tap the
temperature increase or decrease key for
the compartment:
• Single tap shows the current set
• Second tap increases or decreases
• To speed up the selection, tap and
3 4 5
Temperature increase key
4
Light key
5
C
temperature.
the temperature by one degree.
hold the temperature increase or
decrease key until you reach the
desired temperature.
By default, the temperature
digits show the current
temperature at half
brightness. When you tap
once or start selecting a new
setting, the displayed digits
blink. After 3 seconds
without tapping the keys, the
digits stop blinking and the
current temperature is
displayed.
ENGLISH 63