Barista Mode - ECM Manufacture S-MANUALE 64 Bedienungsanleitung

a. Programming your personal single shots t1:
Stop grinding early as desired by pressing the grinding button. After the remaining time appears on the
display, call up t1 via the display.
First press '+' and '-' simultaneously until 't1'
appears on the display.
Press '+' in order to reach the submenu of 't1'.
Now you can reduce the remaining time from the
preset grinding time 't1' in tenths of a second by
quickly pressing
'-' (increase the time again with pressing '+')
For example: the preset time 't1' was 4 seconds
and your remaining time was 00.5 seconds. This
results in the new grinding time 't1' for a portion of
03.5 seconds
b. Programming your personal double shot t2:
Stop grinding early as desired by pressing the grinding button. After the remaining time appears on the
display, call up t2 via the display.
Wait a short while after adjusting the time until 't1'
reappears on the display.
Press '-' so that 't2' is indicated.
If you would like to solely adjust 't2' and keep 't1'
unchanged, press '-' on the display immediately
after 't1' appears in order to reach 't2' directly.
Now you can reduce the remaining time from the
preset grinding time 't2' in tenths of a second by
quickly pressing '-' (increase the time again with
pressing '+')
For example: the preset time 't2' was 7 seconds
and your remaining time was 00.7 seconds. This
results in the new grinding time 't2' for two
portions of 06.3 seconds

5.2.2.2 Barista Mode

The Barista Mode allows to swap between different doses quickly and easly – just by shortly depressing the
grinding button once.
Display
Please make sure the display indicates a single line in the middle.
Translation of the original German user manual
ENGLISH
27