Technical Data; Operation - ECM Manufacture S-MANUALE 64 Bedienungsanleitung

3.2 Technical data

S-Manuale 64 & S-Automatik 64
Housing:
Grinding Mechanism:
Burrs:
Capacity bean hopper:
RPM:
Voltage:
EU:
UK:
Australia:
New Zealand:
US:
Japan:
Frequency:
EU:
UK:
AU:
NZ:
US:
JP:
Motor output
Grind cycles:
Weight:
Dimensions:
4

OPERATION

4.1 Operation
• Place the grinder on an even, water-resistant and stable surface.
• Never place the machine on hot surfaces.
• Make sure that the local main supply voltage corresponds to the information given on the
type plate on the bottom of the grinder.
• Always fasten the bean hopper with the saftey screw.
• Plug the grinder into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
Check before initial operation:
• the grinder is switched off.
• the plug is not plugged into the socket.
Translation of the original German user manual
Polished stainless steel
Aluminum
Stainless steel, ø 64 mm
ca. 500 g
1400 r/min
230 V
230 V
230 V
230 V
120 V
100 V
50 Hz
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
450 W
T-On: 10 sec. T-Off: 80 sec.
6,9 kg net / 7,8 kg gross
H x W x D / 415 x 150 x 245 mm
ENGLISH
T
B
22