Eltako iRoom iO touchDock Bedienungsanleitung Seite 14

by
How to Insert or Change the Quick Key Icons
1. Remove the iPad from the
docking station.
2. Disconnect the docking station
from power.
3. Take off the magnetic glass
frame carefully since it's
connected to the keypad
control cable.
4. Disconnect the keypad control
cable from the port on the
backside of the glass frame.
5. If icons were inserted
previously pull them out with
a tweezer or a cardboard
knife and your thumb.
6. Choose the icons you wish
to use from the included icon
sheet.
7. Insert them into the slots.
8. Reconnect the keypad control
cable and put the glass frame
back on the docking station.
9. If you haven't disconnected
the docking station from power
before, disconnect it now for 3
minutes before reconnecting
to ensure proper functionality.
Page 14