Eox ® Remote; Eox; 70 I Eox App - Sigma EOX REMOTE 500 Betriebs- Und Montageanleitung

3.1

EOX

− Open the clamp of the EOX
− Close the clamp and align the EOX
− Take care that the cable fits the intended guidance at the inner side of the clamp.
− Tighten the screw (Allen Bolt 3mm) (for tightening force please refer to table below).
− Connect the plug (purple) with the cable from your E-Bike.
70 I ASSEMBLY

70 I EOX APP

REMOTE 500
®
® REMOTE 500 and place it on the handlebar (22.2 mm).
® REMOTE 500 ergonomically fit.