Cancelling Pairing - TechniSat DIGITRADIO 4 C Bedienungsanleitung

> Start Bluetooth mode as described in Section 9.1.
> The display will show [Bluetooth] and [Please pair].
> Now start searching for nearby Bluetooth devices on your external device. You
may need to enable the Bluetooth feature on your external device first.
You can find out how to activate the Bluetooth function and carry out a
search on your external device by consulting the instruction manual for your
external device.
The two devices should be within 10 cm of each other during the pairing
process.
> The entry DIGITRADIO 4 C should now appear in the list of Bluetooth devices
found on your external device. Tap on the name of the radio to complete the
pairing process. If the pairing process is successful, a confirmation tone sounds
from the DIGITRADIO 4 C's speaker.
> Depending on the external device, its name now appears on the display of the
DIGITRADIO 4 C. You can now start playing music on your external device.
Depending on the Bluetooth protocol of your external device, you can control
the music playback using the playback buttons on the remote control.
Play/Pause
Next Track
Previous Track
Track from beginning
Stop playback
Volume
Alternatively you can use the playback controls in the music app on your
external device.
If no sound is being played, or no device is paired, the DIGITRADIO 4 C
switches to standby mode after approx. 15 minutes.

9.3 Cancelling pairing

To unpair an active pairing, select > [Unpair] in MENU and press OK. Note that the
device to be decoupled must be connected to the DIGITRADIO 4 C if you want to
decouple it. You can then pair a new device as described in Section 9.2.
Alternatively, you can also cancel the pairing on your external device. Follow
the instructions in the device manufacturer's instruction manual.
64
- Button
- Button
- 2x button
- Button
- Button
- Volume +/- buttons