Display Settings - TechniSat DIGITRADIO 4 C Bedienungsanleitung

12.2 Display settings

It is possible to set the display brightness both for operation as well as standby
mode. There are also various colour schemes available.
> Press the MENU button, select the [Display settings] item and press OK.
Colour scheme
Here you can specify which colour scheme should be used for the displays.
> Use  /  to select the [Colour scheme] item. You can choose between
Deep Black and Steel Blue. Then press OK to save.
Display
Here you can select the additional information display (depending on the source
currently selected).
> Use  /  to select the [Display] item. Select the additional information and
press the OK button to save.
Picture size
Under Picture size, the picture size for the slideshow for DAB+ stations can be
selected.
> Use  /  to select the [Picture size] item. Select a picture size and press the
OK button to save.
Brightness
> Use  /  to select [Brightness]
[Operation] regulates brightness in the normal operating status. You can
choose between [High], [Medium] and [Low] brightness intensities. Use  /
 to select the brightness level and press OK to save.
[Standby] regulates the brightness in standby mode. You can choose
between [High], [Medium] and [Low] brightness intensities. Use  /  to
select a brightness level and press OK to save.
[Auto Dim] automatically dims the display (with the [On] option selected) to
the Low brightness value after 10 seconds without operating the radio.
When the [Off] option is selected, the display will be permanently lit with the
brightness selected under [Operation]. Press OK to apply the setting.
DE
EN
FR
NL
PL
IT
69