Klarstein MELVILLE 3 Bedienungsanleitung Seite 57

Add dishes while a program is running
A forgotten dish can be added only when the detergent . If
this is the case, follow the instructions below.
1. Press the Start/Pause button to pause the running program.
2. Open the door.
3. Add forgotten dishes.
4. Close the door.
5. Press the Start/Pause button, the dishwasher will continue to run.
unloading the dishwasher to avoid scald, the dishes and utensils are still hot and
more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
1. Switch off the dishwasher by pressing the Power button.
2. Turn off the water tap.
Open the door carefully
Hot dishes are sensitive to knocks. The dishes should be allowed to cool down
around 15 minutes before removing from the appliance.
Open the dishwasher's door, leave it open and wait a few minutes before removing
the dishes. In this way they will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Caution: Danger of scalding
Do not open the door when washing.
Forced drainage operation
In standby mode, you can press and hold DELAY button + AUTO OPEN button
simultaneously for 3 seconds to drain the water tank.
EN
57