Programming The Dishwasher - Klarstein MELVILLE 3 Bedienungsanleitung

PROGRAMMING THE DISHWASHER

Wash cycle table according to EN60436
The table below shows the best programmes for the levels of food residue on
them and how much detergent is needed. It also show various information about
the programmes. Consumption values and program duration are only indicative
except for ECO program.
Program Cycle Selection
Information
The ECO program is suitable
to clean normally soiled
(EN6043)*
tableware.
It is the most efficient
program in terms of its
combined energy and water
consumption, and it is used to
assess compliance with the EU
ecodesign legislation.
Use to sanitize your dishes
and glassware. Maintains the
Hygiene
water temperature at around
72°
72 ˚C.
For heavily soiled items
include pots and pans with
dried-on food.
Intensive
For lightly soiled loads, such
as glasses, crystal and fine
(EN6043)
china.
For normally soiled loads that
need quick wash.
58 min
A shorter wash for lightly
soiled loads that do not need
Rapid
drying.
To provides an effective
cleaning of the dishwasher
Self-
itself.
cleaning
*: This program is the test cycle. The information for comparability test is in
accordance with EN60436
Description Detergent
Of Cycle
Wash (55 °C)
Rinse
Rinse (70 °C)
Drying
11 g
Wash (70 °C)
Rinse
11 g
Rinse (72 °C)
Drying
Wash (62 °C)
Rinse
11 g
Rinse (70 °C)
Drying
Wash (50 °C)
Rinse
11 g
Rinse (65 °C)
Drying
Wash (55 °C)
Rinse
11 g
Rinse (65 °C)
Drying
Wash (50 °C)
Rinse 11 g
Rinse (60 °C)
Wash (60 °C)
Rinse
11 g
Rinse (70 °C)
Time Energy Water
(min) (kWh) (L)
155 0.446 6.0
115 0.590 6.0
160 0.580 6.0
85 0.380 6.0
58 0.390 6.0
29 0.290 6.0
65 0.430 6.0
EN
55