Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Long-term exposure to weather and temperature/humidity changes
can have a serious impact on the electrical components and moving
parts of the unit. Always unplug the power cord from the unit before
cleaning or servicing it.
Daily maintenance
•
Clean and remove sweat and moisture after each use.
•
Check that the unit is free of dust and dirt.
•
Do not use aggressive cleaning agents and keep the device
away from moisture.
Semi-annual maintenance
•
Inspect all bolts and nuts connected to the moving parts of the
unit. Tighten bolts and nuts as necessary and appropriate.
•
Check the mobility of moving parts and components of the unit.
Use silicone spray if necessary and appropriate.
We recommend the following:
•
Clean the unit after use.
•
Use a dry cloth to clean the control panel and the areas around
the on/off switch.
•
Use a soft, clean cloth and detergent to remove stubborn marks
and dirt from the unit.
•
Store the unit in a safe, dry place away from heat and water.
CAUTION!
Repairs must be carried out by a professional technician,
unless otherwise specified by the supplier or manufacturer.
Cleaning
General cleaning of the unit will extend its life. Keep the appliance
clean by dusting it regularly. Regular maintenance will prolong the life
of your appliance and prevent injuries! For more information, please
visit https://www.virtufit.nl/service/faq/
CAUTION!
Wear clean shoes to reduce the risk of soiling the
machine. At least once a year, remove the cover to remove dust.
Battery
LR44 BUTTON CELL BATTERY
The display uses one LR44 button cell battery, which can be replaced
on the back of the display. The battery must be inserted correctly.
If the screen is unreadable or only parts of the image work, proceed
as follows:
•
Remove the battery and wait 15 seconds.
•
Replace the battery correctly.
Tips on using the battery
•
Remove the battery from the screen when they are empty or
when the console will not be used for a long period of time.
•
Do not recharge, disassemble or dispose of battery in fire.
•
Pay close attention to the + and - when inserting the battery.
•
It is recommended to use alkaline battery, they have a longer
life than normal batteries.
•
Battery should be replaced when the display loses brightness
or stops showing.
Battery replacement
•
If the display is not accurate, it is recommended to replace the
battery.
•
Use 1 LR44 button cell battery.
CONSOLE (FIG. A)
•
MODE / RESET Press MODE/RESET button to select desired
function. Press MODE/RESET for 4 seconds to reset the value.
Functions
STRIDES/MIN Shows the repetitions per minute during the
•
training session.
•
SCAN Automatically scans each function in order.
•
CNT Displays the total number of steps taken during the
exercise session.
•
TIME Shows the workout time during the exercise.
07
Werbung
Inhaltsverzeichnis
