Using The Appliance; Information On Less Frost Technology; Display And Control Panel; Operating Your Fridge Freezer - Blaupunkt 5CB288FE1 Bedienungsanleitung

3 USING THE APPLIANCE

3.1 Information on Less Frost
Technology
Thanks to the wrap around evaporator,
Less Frost technology offers more efficient
cooling, less manual defrost requirement,
and more flexible storage room.

3.2 Display and Control Panel

1 2 3
Using the Control Panel

1. Temperature set button

2. Super freezing symbol (Super freezing
LED)
3. Alarm symbol (Alarm LED)
4. Adjusted temperature indicator

3.3 Operating your Fridge Freezer

Lighting (If available)
When the product is plugged in for the
first time, the interior lights may turn on 1
minute late due to opening tests.
3.3.1 Temperature Set Button
This button allows setting temperature of
the fridge. In order to set values for fridge
partition, press this button. Use this button
also to activate super freezing mode.

3.3.2 Temperature Settings

• It ensures that the temperature
settings in the cooling and freezing
compartments of your refrigerator are
performed automatically. It may be set
to any value ranging from MIN to MAX
and super freezing mode. As you press
temperature set button from MIN to MAX,
the temperature decreases. To save
energy in winter months, operate your
refrigerator in a lower position.
• Initial temperature setting for refrigerator
is at the middle point.
• Every time you press temperature set
button, setting temperature will decrease
until super freezing symbol and if you
keep on pressing the set temperature will
be min set temperature again.

3.3.3 Super Freezing Mode

When Would It Be Used?
Super freezing mode should be used for
freezing quickly foods that will be added to
freezer compartment later, and preserve
the freshness of foods already in the
freezer compartment.
4
How To Use?
• Press temperature set button until super
freezing light comes on.
• Super freezing led will light during this
mode.
• Maximum amount of fresh food (in
kilograms) to be frozen within 24 hours is
shown on the appliance label.
• For optimal appliance performance
in maximum freezer capacity, set the
appliance to active super freeze mode 24
hours before you put the fresh food into
the freezer.
During this mode:
If you press temperature set button, the
mode will be cancelled and the setting will
be restored to MIN.

3.3.4 Alarm light

In case of a problem within the fridge, the
alarm led will release red light.
Note:Some built-in appliances may have a

stand-by mode.

3.3.5 Stand-By Mode
How To Activate ?
Set "MIN" set value and push set button
until
all leds are blink three times.
How It Works?
In stand-by mode; all components will be
disabled. If user push set button while in
stand-by mode, all leds will blink three
times to show stand-by mode is active.
EN - 34
Super freezing mode will be
automatically cancelled after 48 hours.