millnorway.com
Parts
1. 2 rails for the feet
2. 2 foot brackets
3. 8 screws (pre-mounted)
Assembly
1. Remove the pre-mounted screws on both legs before you insert them into the
brackets, so that you get a stable foot.
2. Attach the legs to the brackets by tightening 2 screws into each bracket.
3. Remove the pre-mounted screws from the bottom of the heater and place the
heater gently on its head to mount the feet.
4. Two screws must be fastened on each foot bracket.
5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.
Instructions mechanical thermostat
Please see table on page 4 for which models that have mechanical thermostats
Control panel
1. Indicator light
2. Thermostat: Adjust the desired heat setting
3. Output selector:
0: OFF
I: Low
II: Medium
III: High
WARNING!
BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
5