Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8
How to activate daytime setback
1. Tuesday 7.30 am you go to the heater and press
2. "d" will be visible in the display. Use the wheel to set what day it is today when
you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not
programming the heater for the various days. This is simply to tell the heater what
day it is when you are programming the heater, since the daytime setback is active
only Monday-Friday. Select 2 for Tuesday. Confirm by pressing
"C" will flash in the display. Use the wheel to set 17 as the desired temperature for
3.
daytime setback. Confirm by pressing
4.
"H" will flash in the display. Use the wheel to set 7 hours as desired setback period
(meaning it will be active from 7.30 am to 2.30 pm). Confirm by pressing
5. The daytime setback will now be active from 7.30 am to 2.30 pm Monday-Friday.
Setback temperature is 17 degrees.
*Control light
light is red when the setback period is inactive but programmed.
How to activate nighttime setback
1. At 10.00 pm you go to the heater and press
2.
"C" will flash in the display. Use the wheel to set 18 as the desired temperature for
nighttime setback. Confirm by pressing
"H" will flash in the display. Use the wheel to set 8 hours as desired setback period
3.
(meaning it will be active from 22.00 pm to 6.00 am). Confirm by pressing
4. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
*Control light
light is red when the setback period is inactive but programmed.
N.B. If a power cut occurs/you turn off the heater, the programming will be lost and
you will have to do this over again.
is green when the heater is in an active setback period. The control
is green when the heater is in an active setback period. The control
on the heater's control panel.
on the heater's control panel.
Werbung
Inhaltsverzeichnis
