Hacker HST-70 Betriebsanleitung Seite 34

Settings
Four further menus ( [Motor] / [Regulators] / [Inputs] / [Net] ) are subordinated to the [Settings] but-
ton, in which you can make settings. Attention! The drive must not be in operation when you
change something here!
In all four submenus you will find the [Read] / [Write] / [Import] / [Export] buttons.
[Read]: Parameters are transferred from the controller to the GUI and displayed.
[Write]: Displayed values / values that you have changed are uploaded to the controller.
[Import]: A file saved on the PC can be selected and read into the GUI.
[Export]: The currently displayed settings are saved to a file on your PC.
Before you change anything, it is advisable to read out the parameters present in the con-
troller via [Read] and save them as a backup file via [Export]. This way you can restore the
original state via [Import] and [Write].
NOTE
Changing parameters
Changing the parameters requires sound specialist knowledge. Incorrect parameters
can lead to the destruction of the drive and cause consequential damage.
If you are not sure about the tuning of your drive, contact our industrial depart-
ment:
his@hacker-motor.com
Brushless DC Controller HST-70
Orginal operating manual
Mounting and commissioning
Page 34 of 38
Rev1.2