Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GUI user interfaces
Instruments
When you open the GUI, the „Instruments" window opens, with the most important displays, for
the operation of the drive:
•
Speed
•
Current
•
Display for the drive signal [%].
•
Input voltage
•
Controller temperature
•
Motor temperature (if the motor has a corresponding sensor)
If the dot under „Run" is green, the system is ready for operation.
You can operate the displayed buttons with the mouse, as well as with the keyboard (Tab key
(TAB) / arrow keys).
With the [Connect] / [Disconnect] button, to the right of the displays, you activate the connec-
tion via your CAN adapter, or terminate it. For this, the controller must be connected to a voltage
source.
For setting work, a power supply unit is recommended for this purpose, which can be set in the
voltage range from 9 - 58.8 V and on which a low current can initially be set - for safety reasons.
Use the [Version] button to query the installed software version of the controller.
If you click on [Update], you can install another software on the controller.
Brushless DC Controller HST-70
Orginal operating manual
Mounting and commissioning
Page 32 of 38
Rev1.2
Werbung
Inhaltsverzeichnis
