Installation - Klarstein ROYAL FLUSH Bedienungsanleitung

EN

INSTALLATION

On installation, the minimum distance between the hob and the hood must be
exactly complied withand follow the numbering of the steps and the additional
instructions.
Execution with air exhausted outdoors (A- see also the installation data). The
vapours are extracted via an air exhaust hose fixed to the connector ring.
The diameter of the exhaust air hose must conform to that of the connector ring.
If a smoke non-return valve is used or is planned, check whether it can open and
close freely after the installation of the exhaust air hose. The extractor hood can be
equipped with one (top) or two (top and back) extractor openings.
The hood is normally initially fitted out for use of the top extractor opening, as an
extractor hood. Openings not required are fitted with a plastic cover. This plastic
cover can be easily removed by turning counterclockwise and optionally fitted to
another opening which is not required.
Measurements
26