Scope Of Supply; Technical Data - NovoPress Novipro ACO103 BT Betriebsanleitung

5

Scope of supply

EN
The scope of supply for the standard equipment includes:
ACO103 BT
Press device incl. operating manual
Battery charger incl. operating manual
12 V rechargeable battery
Safety instructions
EU Declaration of Conformity /
GB Declaration of Conformity
Carrying case
6

Technical data

Device:
Rated voltage/battery:
Power consumption
Nominal force:
Height:
Length:
Width:
Net weight:
Compression range:
Max. noise level:
Noise pressure level:
Vibration value:
Type of protection:
Temperature range during operation:
Wireless technology:
Frequency range:
Bluetooth maximum output power:
1) Measurement uncertainty 3 db(A)
The stated vibration emission value was measured using a standard test procedure and can be
employed for the purpose of comparison with another device.
The stated vibration emission value can also be used to obtain an initial estimate of interruptions
during intermittent operation.
Caution The vibration emission value may differ from the stated value while the device is actually in
use, depending upon the manner in which the device is used. It may be necessary to establish safety
measures to protect operating personnel, depending on the actual conditions of use (intermittent
operation.
⎓
Information!
Wear hearing protection.
ACO103 BT
Optional additional accessories (e.g.
press jaws) may also be included.
Please contact the system supplier for
information on the scope of supply.
⎓
ACO103 BT
12 V (lithium-ion) / M12 (Milwaukee)
240 W
19 kN
71 mm
319 mm with 2,0 Ah battery
345 mm with 4,0 Ah battery
98 mm
1,6 kg (without battery)
Plastic: up to Ø 40 mm
Metal: up to Ø 35 mm
82,0 db(A)
1)
71,0 db(A)
1)
<2,5 m/s²
2)
IP20
-10°C to +50°C
Bluetooth® 4.0 smart
2402,0 MHz to 2480,0 MHz
1,8 dBm
2) Measurement uncertainty 1.5 m/s²
16