Makita HR2800 Betriebsanleitung Seite 9
Vorschau ausblenden
Andere Handbücher für HR2800:
- Betriebsanleitung (65 Seiten) ,
- Bedienungsanleitung (62 Seiten) ,
- Bedienungsanleitung (60 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Blow-out bulb
• Dust cup
• Dust extractor attachment
• Safety goggles
• Plastic carrying case
• Keyless drill chuck
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN62841-2-6:
Model HR2800, HR2810
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model HR2810T
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model HR2811F
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model HR2811FT
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
• The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
• The declared noise emission value(s) may also be
used in a preliminary assessment of exposure.
WARNING:
• Wear ear protection.
• The noise emission during actual use of the power
tool can differ from the declared value(s)
depending on the ways in which the tool is used
especially what kind of workpiece is processed.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Vibration
The following table shows the vibration total value (tri-
axial vector sum) determined according to applicable
standard.
ENG905-1
): 89 dB (A)
pA
): 100 dB (A)
WA
): 91 dB (A)
pA
): 102 dB (A)
WA
): 93 dB (A)
pA
): 104 dB (A)
WA
): 91 dB (A)
pA
): 102 dB (A)
WA
ENG907-1
Model HR2800
Vibration
Work mode
emission
Hammer drilling
into concrete
19.9 m/s
(a
)
h, HD
Model HR2810
Vibration
Work mode
emission
Hammer drilling
into concrete
19.9 m/s
(a
)
h, HD
Chiselling
17.1 m/s
(a
)
h, CHeq
Model HR2810T
Vibration
Work mode
emission
Hammer drilling
into concrete
18.8 m/s
(a
)
h, HD
Chiselling
18.0 m/s
(a
)
h, CHeq
Model HR2811F
Vibration
Work mode
emission
14.6m/s
Hammer drilling
into concrete
(a
)
15.7 m/s
h, HD
12.3 m/s
Chiselling
(a
)
h, CHeq
13.9 m/s
Model HR2811FT
Vibration
Work mode
emission
16.3 m/s
Hammer drilling
into concrete
(a
)
15.6 m/s
h, HD
15.5 m/s
Chiselling
(a
)
h, CHeq
15.0 m/s
* The test condition of recommended practical operation
meets EN62841-2-6, except for the following points:
• Feed force is applied to the switch handle (main
handle) for working accuracy and efficiency.
• The side grip/handle (auxiliary handle) is held to keep
balance of the tool.
Applicable
Uncertainty
standard /
(K)
Test
condition
2
2
EN62841-2-6
1.7 m/s
Applicable
Uncertainty
standard /
(K)
Test
condition
2
2
EN62841-2-6
1.7 m/s
2
2
EN62841-2-6
1.5 m/s
Applicable
Uncertainty
standard /
(K)
Test
condition
2
2
EN62841-2-6
1.5 m/s
2
2
EN62841-2-6
1.5 m/s
Applicable
Uncertainty
standard /
(K)
Test
condition
2
2
EN62841-2-6
1.5 m/s
Recommended
2
2
practical
1.7 m/s
operation*
2
2
EN62841-2-6
1.5 m/s
Recommended
2
2
practical
1.5 m/s
operation*
Applicable
Uncertainty
standard /
(K)
Test
condition
2
2
EN62841-2-6
1.9 m/s
Recommended
2
2
practical
1.6 m/s
operation*
2
2
EN62841-2-6
1.5 m/s
Recommended
2
2
practical
1.9 m/s
operation*
9
Werbung
Inhaltsverzeichnis
