Klarstein CRISP-PRO Bedienungsanleitung Seite 25

Tip: To reduce the weight, you can remove the grill from the pan and flip the
ingredients on the grill only. To do so, pull the pan out of the appliance, place it on
a heat-resistant surface and lift the grill out of the pan
Tip: If you set the timer to half the preparation time, you will hear the timer bell
when you have to shake the ingredients. However, this means that you have to set
the timer again to the remaining preparation time after shaking.
7. When you hear the timer bell, the set preparation time has elapsed. Pull the
pan out of the appliance and place it on a the trial framework.
Note: You can also switch off the appliance manually. To do this, turn the time
control knob to 0.
8. Check if the ingredients are ready. If the ingredients are not ready yet, simply
slide the pan back into the appliance and set the timer to a few extra minutes.
9. To remove ingredients (e.g. fries), pull the pan out of the Hot-air fryer and
place it on trial framework and and lift the grill out of the pan.
Do not turn the grill upside down with the pan still attached to it, as any excess oil
that has collected on the bottom of the pan will leak onto the ingredients.
The pan and the ingredients are hot and hot fryer. Depending on the type of the
ingredients in the I fryer, steam may escape from the pan.
10. Empty the pan into a bowl or onto a plate.
Tip: To remove large or fragile ingredients, lift the ingredients out of thegrill by a
pair of tongs.
11. When a batch of ingredients is ready, the Hot-air fryer is instantly ready for
preparing another batch.
EN
25