Ambient Temperature - Pkm KS242-EM Bedienungsanleitung

➢ If you turn the thermostat to 0, the cooling for the entire appliance will be
switched off.
➢ If you turn the thermostat to 1 – 2, the temperature inside the fridge will be
increased (lower / slight cooling).
➢ If you turn the thermostat to 3 – 4, the temperature inside the fridge is set to a
medium temperature value (medium / average cooling).
➢ If you turn the thermostat to 5 – 6 or 7, the temperature inside the fridge will be
decreased (5 – 6 = hight / strong cooling / 7 = highest / strongest cooling)
PLEASE NOTE: the higher the thermostat setting is, the longer the compressor
operates to reach the set cooling temperature.
The description of the thermostat settings represents standard values only.
You can check the temperature inside the appliance using a suitable thermometer
(not included in the scope of delivery).
When the ambient temperature is extremely high (please observe the climatic class
of your appliance in chapter T
colder setting if needed (thermostat settings 5 – 6 or 7), the energy consumption may
be increased. If the colder setting should cause strong formation of encrusted ice,
please select a lower setting (thermostat settings 1 – 4).
Extremely high ambient temperatures and simultaneously operating at the coldest
setting may make the compressor operate permanently to keep the temperature
constant inside the appliance. Please observe the climatic class of your appliance in
chapter T
ECHNICAL
Please observe the R
below).
WARNING! The thermostat setting 0 switches off the compressor only.
You must unplug the appliance to disconnect it from the mains.
R
ECOMMENDED
A
MBIENT
S (
UMMER HIGH AMBIENT TEMPERATURE
ECHNICAL
D !
ATA
ECOMMENDED THERMOSTAT SETTINGS FOR THE FRIDGE
T
HERMOSTAT SETTINGS FOR THE FRIDGE
T
EMPERATURE
D !), you can set the temperature to a
ATA
T
HERMOSTAT SETTING
)
~ 73 ~
3 – 4
(s.