Initial Operation - Pkm KS242-EM Bedienungsanleitung

1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
3. Do not start the appliance immediately after installation. Wait at least 4 - 6 hours to
ensure proper operation.
4. Connect the appliance to the mains properly.
5. The setting of the temperature of the appliance can be adjusted manually by pressing
the relevant button until the desired value will be indicated (s. chapter 4.5 S
OF THE TEMPERATURE
6. The noise generated by the compressor and the gases / liquids of the appliance is
normal.
7. If operation was interrupted, wait 5 minutes before restart.
8. The appliance needs some time to balance temperatures when you have changed the
settings before or when you have stored additional food in the appliance. The
duration of this period of time depends on the range of the change, the ambient
temperature, the amount of food and the frequency of door-openings. When you set
the temperature of the appliance these aspects should be taken into account.
9. Due to the difference of pressure, the doors may be difficult to open shortly after
closing. Wait a few minutes and you can open the doors easily.
10. Operate the appliance according to the instructions described in the following
chapters.
➢ Set the temperature of the appliance to a medium setting and let the empty
appliance operate for 3 to 4 hours (s. chapter 4.3 S
➢ Select your desired setting. You can now store food in the appliance (depending on
the selected working mode: fridge mode or freezer mode).
et seq.).
I
NITIAL OPERATION
~ 70 ~
CLEANING AND MAINTENANCE
ETTING OF THE TEMPERATURE
).
ETTING
)