Assembly - MAXXMEE JC-220D Bedienungsanleitung

Vibrating Steam Mop
■
Make sure that the connecting cable
does not present a trip hazard.
WARNING – Danger of Fire!
■
Do not cover the device during
operation in order to prevent it from
catching fire. Do not insert anything
into the openings of the device and
make sure that they do not become
clogged.
■
Do not connect the device along with
other consumers (with a high wattage)
to a multiple socket in order to pre-
vent overloading and a possible short
circuit (fire).
NOTICE – Risk of Damage to
Material and Property
■
If a fault occurs during operation, pull
out the mains plug. Otherwise always
switch off the device first before the
mains plug is pulled out.
■
Always pull the mains plug and never
the mains cable when disconnecting
the device from the mains power.
■
Do not pull or carry the device by the
connecting cable.
■
Protect the device from other heat
sources, flames, direct sunlight or im-
pacts. Also protect the main unit with
the exception of the water tank from
persistent moisture.
■
Keep the device in a dry place at tem-
peratures of between 0 and 40 °C.
■
Never place objects on the device or
the connecting cable.
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
01589_Inlay_DE-EN-FR-NL_A5.indb 15 01589_Inlay_DE-EN-FR-NL_A5.indb 15

ASSEMBLY

Please Note!
■
The device must be switched off,
cooled down and disconnected from
the mains power before assembling
and taking apart or changing acces-
sories.
Attaching / Detaching the Handle
Pole
Assembling: Plug the end of the handle
pole (3) into the upper opening of the
frame (6). When you do this, press the
locking lug of the handle pole so that it
fits into the frame. To do this, rotate the
handle pole from side to side a little if
necessary. It must engage.
Taking apart: Press the locking lug of the
handle pole and pull it out at the same
time.
Attaching / Detaching the Floor Cloth
The floor cloth (22) attaches to the clean-
ing foot (11) by means of hook and loop
fasteners.
Attaching: Place the floor cloth on the
cleaning foot and press it on firmly.
Detaching: Pull the floor cloth off the
cleaning foot.
Attaching / Detaching the Carpet
Glider
Attaching: Place the carpet glider (10)
on the cleaning foot (11) with the floor
cloth (22) fitted and press it on firmly. You
must hear the carpet glider engage in
place.
Detaching: Press down the carpet glider
on one of the locking lugs to release it
from the cleaning foot and take it off.
EN
15
16.12.2021 11:58:56 16.12.2021 11:58:56