Handling - HOLZMANN-MASCHINEN WB106MINI Betriebsanleitung

OPERATION
Only use the product when it is in perfect condition. Before each use, visually inspect the
connecting parts to ensure that they are firmly seated.
14.1

Handling

The product may only be used under the direct supervision of adults!
HOLZMANN Maschinen GmbH
2. Insert the cross side of the drawer back panel into
3. Place the worktop upside down.
www.holzmann-maschinen.at
the groove of the drawer side panels and screw
them together (6).
Make sure that there is a continuous internal groove
(7).
Slide the drawer bottom into the groove (8).
Secure the drawer front panel with 2 screws each
and a drawer side panel (9). Note again that the
drawer bottom is embedded in the groove of the
drawer front panel.
Place the drawer runners (10) and fix them with 2
screws each at the front and back in the openings
provided (11).
Slide the drawer into the drawer runners (12).
Fix the workbench frame with the worktop at the
provided holes with the hexagon screws and the
washers (13).
Turn the workbench.
Push the two vises into the provided openings and
fix them with the lever (14).
Place the wood pegs in the openings provided (15).
Place the bench hooks in the desired openings (16).
Adjust the desired worktable height with the foot
extension as required (17).
OPERATION
14
WB106MINI