Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TRANSPORT
For proper transport, observe the instructions and information on the transport packaging
regarding centre of gravity, attachement points, weight, means of transport to be used and
prescribed transport position, etc.
Pay attention to the correct body posture when lifting, carrying and setting down the load.
Lifting / Setting down
When lifting/setting down, ensure that you are standing firmly (legs hip-width apart).
•
Lift/set down load with knees bent and back straight.
•
Do not lift/set down load with a jerk.
•
Carrying
•
Carry load with both hands as close to body as possible.
Carry load with straight back.
•
Always secure the assembled product in the transport position when transporting it to prevent
damage to the product.
ASSEMBLY
13.1
Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
13.2
Requirements for the installation site
Place the product on a level, solid surface. Observe the safety requirements and the dimensions of
the product. The chosen installation site must comply with the local safety regulations.
13.3
Assemble
Assemble the workbench as described below:
HOLZMANN Maschinen GmbH
1.
www.holzmann-maschinen.at
Place a frame brace with groove facing upwards (1).
Place one connecting nut each with horizontally
aligned slot into the openings of the frame brace
(2).
Fix one side panel and the frame brace each with
the bolt (3).
Slide the long side of the shelf into the groove of the
frame brace (4).
Fix the 2
frame brace to both side panels as
nd
described above (5).
Again, note the embedding of the frame brace into
the groove.
TRANSPORT
13
WB106MINI
Werbung
Inhaltsverzeichnis
