Sharp K-60V19BQM-EU Bedienungsanleitung Seite 15

4.2. HOW TO USE THE VISIO TOUCH CONTROL UNIT
Mode Key
Mode Key
M
Alarm Key Alarm Key
Adjusting the Day Time:
When the built in oven installed firstly the
time of day must be adjusted according
to below instructions.
When oven installed firstly,"0.00" will start
to flash on the display. Touch "M" sensor
or " - " and " + " sensors to adjust the day
time mode. " : " symbol will start to flash
on the display. You can adjust it with " - "
and " + " sensor.If Auto cooking mode is
off, touch " - " and " + " sensors at the
same time to the day time mode. You can
adjust it with " - " and " + " sensor.
You have to adjust the day time to use
oven function.
Oven function
Oven function
display display
Timer display
Timer display
Temperature display
Temperature display
ADJUSTING THE COOKER
TIME:
Adjusting the Minute Minder:
Touch alarm sensor which shows " "
symbol. " " will be flashing on the display.
"0.00" will appear on the clock digits. Adjust
the desired time period for the warning by
using Timer Plus and Minus sensor while
the symbol is flashing. Some time after
the completion of the adjustment, symbol
will begin to light continuously. When the
symbol begins to light continuously, the
audible warning time adjustment is done.
When the set time is up, the timer gives
an audible warning and symbol begins
to flash on the screen. Pressing " - "or
"+" will stop the audible warning and the
symbol disappears on the screen.
EN - 13
Time setting/Temperature
Time setting/Temperature
settings for meat probe/ settings for meat probe/
Key lack Key
Key lock Key
Time setting Key
Time setting Key