Product Description And Specifications - Bosch PDA 240 E Originalbetriebsanleitung

OBJ_BUCH-1700-002.book Page 12 Tuesday, October 25, 2016 10:27 AM
12 | English
 Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding and polishing of
wood, plastic, metal, filler, as well as for painted surfaces. It is
especially suitable for profiles, corners or hard to reach
locations.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Vacuum connection
2 Thumbwheel for orbit frequency preselection
3 On/Off switch
4 SDS button for release of the sanding plate
5 Sanding sheet*
6 Sanding plate
7 Pad extender*
8 Sanding sheet for extender*
9 Velcro backing for sanding tongue*
10 Narrow pad extender*
11 Narrow rounded pad extender*
12 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 1P6 | (25.10.16)
Technical Data
Delta Sander
Article number
Rated power input
Output power
No-load speed
No-load orbital stroke rate
Sanding plate size (corner to
corner)
Orbit diameter
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted sound pressure level of the product
is 78 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-4: a
2
K=1.5 m/s .
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work
patterns.
Assembly
 Before any work on the machine itself, pull the mains
plug.
 Prevent dust accumulation at the workplace. Dust can
easily ignite.
PDA 240 E
0 603 346 7..
W 240
W 95
-1
min 6500 – 8500
-1
min 13000 – 17000
mm 93
mm 2.0
kg 1.1
/II
2
=5 m/s ,
h
Bosch Power Tools