Connecting The Appliance; Turntable - hanseatic AM925EA9 Gebrauchsanleitung

Page EN-18
5. Clean the turntable (7) and the roller
ring (8) in the dishwasher or by hand.

Connecting the appliance

1. Check that the connection voltage of the
appliance corresponds to the mains volt-
age in your home (see type plate on the
back of the appliance).
2. Connect the appliance to a properly in-
stalled protective contact socket with
sufficient fuse protection. Do not use mul-
tiplugs or extension cables!
After inserting the mains plug into the socket,
you will hear a beep. The display shows

Turntable

The turntable (7) must be used whenever the
microwave is operated.
The turntable rotates during operation to en-
sure uniform heating.
3. Place the rotary plate drive (3) in the re-
cess in the middle.
4. Place the turntable (7) on the floor of the
cooking chamber and turn it until its cen-
tre clicks into place on the rotary plate
drive.
5. Always place the cooking containers on
the turntable. This prevents liquid from
seeping into the appliance if it should boil
over.
.
0: 0 0
Set-up and start-up