Technical Data; English (Original Instructions) - DeWalt DCS389 Originalanweisung

RECIPROCATING SABRE SAW
DCS389
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No load speed
Stroke length
Cutting capacity in wood/metal profiles/
plastic tubes
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
While cutting boards
Vibration emission value a =
h,B
Uncertainty K =
While cutting wood beams
Vibration emission value a
h,WB
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT one of the
e
DCS389
V
DC
Li-Ion
min -1 0–3000
mm 28.6
mm 300/130/160
kg 3.54
dB(A)
dB(A)
dB(A)
m/s 2 15.3
m/s 2 1.5
= m/s 2 15.9
m/s 2 1.5
EC-Declaration of Conformity
Machinery Directive
Reciprocating Sabre Saw
DCS389
54
D WALT declares that these products described under
e
Technical Data are in compliance with: 2006/42/EC,
1
EN62841-1:2015+AC:2015, EN62841-2-11:2016+A1:2020.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
84
Vice-President Engineering, PTE-Europe
95
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
5
20.07.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
Reciprocating Sabre Saw
DCS389
D WALT declares that these products described under
e
Technical Data are in compliance with: The Supply of
Machinery (Safety) Regulations, 2008, S.I. 2008/1597
(as amended), EN62841-1:2015+AC:2015, EN62841-2-
11:2016+A1:2020.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
e
REGULATIONS 2008
WALT at the following
e
e
EngLIsh
WALT at
e
WALT.
WALT.
23