HOMCOM 823-019 Montageanleitung Seite 6

Always unplug the purifier before cleaning or storing.
Keep the product away from water and wet surfaces to avoid electrical hazards.
Cleaning & Care
- Unplug the product before cleaning or moving.
- Keep the product away from liquid.
- Do not use detergent, metal cleaning brush, petrol, alcohol or flammable liquids to clean the product.
- Regularly clean the product and replace the filters when necessary for efficiency.
- Unplug the machine and wait 15 minutes before cleaning.
- When the product is off, put back in the box and store in a cool and dry location, away from direct sunlight.
Use a soft cloth to clean the surface. If extremely dirty, use a warm wet cloth with a temperature
around 35-40°C. Ensure the product is completely dry before using.
The three-in-one filter is non-washable. It is recommended to use a soft brush to clear dust on the
surface. Or occasionally place under sunshine to extend the life of the filter. The replacement period
of the filter differs, depending on the using hours and environment.
For the dust Sensor, use a soft brush to clear dust on its surface and restore the sensitivity. It is
recommended to clean monthly.
CAUTION
5