HOMCOM 823-019 Montageanleitung Seite 5

After replacing the filter, hold the 'RESET' button for three seconds to turn off the light. After that, the
calculation of operation time restarts again.
If the product is used 12 hrs a day, the reset button will flash after six months.
Installation of Filters
Ensure you remove the plastic bag before putting filters into the purifier.
1. Take away the front panel board by holding your hands on the top two sides and pulling it out. (Fig. 1)
2. Take the three-in-one composite filter out of the plastic bag. (Fig. 2)
Fig. 1
3. Place the three-in-one composite filter into the machine. NOTE: Wrongly placing filters will disrupt the
performance of the machine (Fig. 3).
4. Place the front panel board onto the machine, put your hand on the top two sides and push.
5. Insert the feet of the front panel board into the hole of the machine. (Fig. 4)
6. Plug in the product (Fig. 5)
Fig. 4
Fig. 2
Fig. 5
4
Fig. 3