Technical Data; Ec Declaration Of Conformity - DeWalt DW711 Anweisungen

TABLE TOP MITRE SAW DW711
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical data

Voltage
(U.K. & Ireland only)
Power input
Power output
Blade diameter
Blade bore
Max. blade speed
Max. cross-cut capacity at 90°
Max. cross-cut capacity 45°
Max. depth of cut 90°
Max. depth of bevel cut 45°
Mitre (max. positions)
Bevel (max. positions)
Compound cuts
90° mitre
Max. depth of cut at 45° bevel
Max. depth of cut at 48° bevel
45° mitre
Max. depth of cut at 45° bevel
Max. depth of cut at 48° bevel
48° mitre
Max. depth of cut at 45° bevel
Max. depth of cut at 48° bevel
Max. ripping capacity left/right
Max. depth of cut bench saw
Automatic blade brake time
Weight
Fuses:
Europe
U.K. & Ireland
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
WALT one of the most reliable
E
DW711
V 230
V 230/115
W 1,300/1,100
W 900/800
mm 260
mm 30
-1
min 2,750/2,850
mm 140
mm 100
mm 90
mm 45
left 50°
right 50°
left 48°
mm 48
mm 45
mm 48
mm 45
mm 48
mm 45
mm 180/60
mm 0 - 50
s < 10.0
kg 20
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
EC-Declaration of conformity
DW711
D WALT declares that these Power Tools have been designed in
E
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029-1,
prEN 61029-2-11, EN 55014, EN 55014-2, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact D
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EEC,
measured according toprEN 61029-2-11:
L (sound pressure)
pA
L (acoustic power)
WA
* at the operator's ear
Take appropriate measures for the protection of hearing.
Weighted root mean square acceleration value according to
prEN 61029-2-11:
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
B&D_19a
E N G L I S H
WALT at the address below or
E
DW711
dB(A)* 90.8
dB(A) 98.8
DW711
2
< 2.5 m/s
Cert. No.
BM 9910407
23