Technical Data; Ec Declaration Of Conformity - DeWalt DW017 Anweisungen

E N G L I S H
MITRE SAW DW017
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical data

Sound pressure (L )
pA
Acoustic power (L )
WA
Hand/arm weighted vibration
Voltage
Power output
Blade diameter
Blade bore
Max. blade thickness
Max. blade speed
Max. crosscut capacity at 90°
Max. mitre cut capacity at 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
left
right
Bevel (max. positions)
left
right
0° mitre
Resulting width at max. height 70 mm
Resulting height at max. width 300 mm
45° mitre left
Resulting width at max. height 70 mm
Resulting height at max. width 212 mm
45° mitre right
Resulting width at max. height 70 mm
Resulting height at max. width 212 mm
45° bevel left
Resulting width at max. height 50 mm
Resulting height at max. width 300 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 254 mm
Automatic blade brake time
Dust collection efficiency
Weight
Battery pack
Battery type
Voltage
Weight
Charger
Mains voltage
Approx. charging time
Weight
Fuses:
Europe
U.K. & Ireland
30
WALT one of the most reliable
E
DW017
dB(A) 88
dB(A) 101
2
m/s < 2.5
V 24
W 630
mm 216
mm 30
mm 1.6
-1
min 4,000
mm 300
mm 212
mm 70
mm 50
50°
60°
48°
2°
mm 300
mm 70
mm 212
mm 70
mm 212
mm 70
mm 300
mm 50
mm 65
s < 5.0
mg/m 3 < 2.0
kg 20.5
DE0242 DE0241
NiCd NiMH
V 24 24
kg 1.4 1.4
DE0246
V 230
AC
min 60/70
kg 0.6
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DW017
D WALT declares that these power tools have been designed in
E
compliance with: 98/37/EEC, 89/336/EEC, EN 55014-2, EN 55014-1,
EN 60335, EN 61000-3-2, EN 61000-3-3, EN 50260-1 & EN 61029.
For more information, please contact D
refer to the back of the manual.
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
WALT at the address below or
E