Advanced Performance Setup - XciteRC Hubsan X4 Desire Bedienungsanleitung

GPS and RTH function only available outdoors.
5.5 PHOTO / VIDEO
PHOTO / VIDEO
Insert the SD card into quadcopter before using Photo/Video function.
Press the Photo/Video button for 0.5 second to take photos.
Press the Photo/Video button for 1.5 seconds to take videos and press again to save the videos.
Stop recording before the SD card is removed.

6. ADVANCED PERFORMANCE SETUP

6.1 GPS POSITIONING/ HOME POINT SETTING
Set
1.) GPS Positioning works ONLY when the GPS signal has no less than 6 satellites.
2.) Home Point is recorded when armed the motors with no less than 6 GPS satellites.
3.) You should be in an open place to search for the GPS satellites, it'll take 3 mins to finish
the searching, and the GPS signal strength depends on the flying environment.
RTH
RTH only available when there are no less
than 6 GPS satellites displayed on transmitter.
Press the RTH for 1.5 seconds to activate the
function, press again to stop the RTH.
Set
08
©
2016 Hubsan