Yamaha NS-SW300 Benutzerhandbuch Seite 11

Example: Connecting two subwoofers
NS-SW200
NS-SW300
Subwoofer
Subwoofer
Subwoofer Subwoofer
1
1
1
1
Amplifier or
Amplifier or
receiver 1
Mono pin cable
1
receiver
Mono pin cable
Connecting to the INPUT3 (LFE) terminal
If your amplifier (or receiver) can cut off high frequencies from signals sent to the subwoofer, connect the
NS-SW300 NS-SW200
amplifier to the subwoofer's INPUT3 (LFE) terminal.
This will promote higher sound quality because the signal routing in the subwoofer is shortened by bypassing
the built-in HIGH CUT circuit.
6 En