Safety Information; Graphical Symbols On The Machine - Parkside PWH 2800 A1 Originalbetriebsanleitung

GB IE
*
Continuous operation with intermittent loading (4
min. loading - 6 min. idling)
** The maximum thickness of branch that can be
shredded depends on the type of wood and pro-
perties of the shredding material.
The maximum choppable branch thickness for
hard wood (e.g. oak/beech branches) is less than
for soft wood
(e.g. pine/spruce wood). Dry or gnarled wood
also means a reduction in the thickness that can be
shredded.
The maximum permitted mains impedance
at the electrical connection point of 0.28
ohm must not be exceeded. The user must
ensure that the device is only operated
using a mains supply network that meets
the requirements.
If necessary, local power supply compa-
nies can be consulted with regards to the
system impedance.
Levels of noise were determined according
to the norms and regulations in the decla-
ration of conformity.

Safety information

This device may cause seri-
ous injury if used improperly.
Before working with the
device, carefully read the
operating instructions and fa-
miliarise yourself with all the
controls. Ask an expert for
advice
if you are unsure. Keep
this manual in a safe pla-
ce and pass it on to every
subsequent user so that the
information is available at all
times.
22
Graphical symbols on the
machine
Caution!
Read the instruction manual!
Wear eye and hearing
protection
Wear protective gloves
Do not expose the machine
to rain
WARNING! Switch the ma-
chine off and re move the
mains plug before changing
settings, cleaning the machi-
ne or if the cable is dama-
ged.
Caution! Risk of injury from
rotating cutting roll!
Keep your hands and feet
away from the openings whi-
le the machine is running.
Before touching any ma-
chine parts, wait until they
have come to a complete
standstill.
Caution! Danger due to
ejecting parts! Maintain a di-
stance from the hopper and
ejection zone. Keep other
people away;
Do not use as a step!
Guaranteed sound power
L
WA
level
dB