Ryobi RLT30CD Bedienungsanleitung Seite 14

GB
F D E I
Mix fuel outdoors where there are no sparks or flames.
■
Wipe up any fuel spillage. Move 9 m away from
refueling site before starting engine.
Stop the engine and allow to cool before refueling or
■
storing the unit.
Allow the engine to cool; empty the fuel tank and
■
secure the unit from moving before transporting in a
vehicle.
SPECIFIC SAFETY RULES FOR TRIMMER USE
Replace bump head if cracked, chipped, or damaged
■
in anyway. Be sure the bump head is properly
installed and securely fastened. Failure to do so can
cause serious injury.
Weight
- Without fuel, without string head, without guard
- Without fuel with string head
Fuel tank volume
Cutting swath
Engine displacement
Line diameter for Reel Easy
Line diameter for Pro Cut ll
Maximum engine performance
(in accordance with ISO 8893)
Maximum rotational frequency
of the the spindle
Engine speed (rotational frequency)
at recommended max. spindle
rotational frequency
Engine speed (rotational frequency)
at idle
Fuel consumption (in accordance
with ISO 8893) at max.
engine performance
Specific fuel consumption
(in accordance with ISO 8893)
at max. engine performance
Vibration level idling
- Front handle
- Rear handle
Vibration level racing
- Front handle
- Rear handle
Sound pressure level
(in accordance with EN 27917)
Sound power level (in accordance with ISO 10884)
All manuals and user guides at all-guides.com
P NL S DK N FIN GR HU
SPECIFICATION
TM
TM
CZ RU RO PL SLO HR TR EST LT
English
Make sure all guards, straps, deflectors and handles
■
are properly and securely attached.
Use only the manufacturer's replacement line in the
■
cutting head. Do not use any other cutting attachment.
Never operate unit without the safety guard in place
■
and in good condition.
Maintain a firm grip on both handles while trimming.
■
Keep bump head below waist level. Never cut with
the bump head located over 76 cm or more above the
ground.
(kg)
[cm 3 or (L)]
(mm)
(cm 3 / cc)
(mm)
(mm)
(kW)
(min- 1 )
(min- 1 )
1
(min- )
[kg/h or (L/h)]
[g/kW.h or (L/kW.h)]
(m/s 2 )
(m/s 2 )
dB (A)
dB (A)
11 11
LV
RLT30CD RLT30CES
4.66 5.25
4.80 5.42
415 or (0.415) 415 or (0.415)
432 432
30 30
2.4 2.4
2.7 2.7
0.75 0.75
12,000 12,000
12,000 12,000
2,800-3,500 2,800-3,500
0.48 or (0.66) 0.48 or (0.66)
640 or (0.87) 640 or (0.87)
5.4 6.3
2.6 3.4
12 12.9
14.4 12.3
100.5 98.4
110 111
SK BG