System Description; Test - tom logisch aquonic Benutzerhandbuch

System description

aqounic is a fully automated water treatment plant,
used for turning lake or riverwater into tap and fresh
water onboard. The plant is controlled by an automa-
ted control unit with no user input required. Further-
more, rain or well water can be treated by the plant.
A prepump sucks in the water through a filter, which
will then be pushed through an osmosis diaphragm by
a high pressure pump. The resulting waste water con-
taining the filtered material will diverted overboard, or

Test

All parts of the plant are individually CE-certified and the
plant itself is manufactured CE compliant. The cleaning
capacity was tested according to the rules of the German
Drinking Water Ordinance. aqounic was intensively tested
to prove its cleaning capacity. These tests included all na-
tural and agricultural poisonous and harmful substances
among other things.
FULLY AUTOMATED WATER TREATMENT PLANT FOR YACHTS AND HOUSEBOATS
can be used for flushing the WC instead. The produced
fresh water will be further purified by an UVC sterili-
zation unit and remineralized. This procedure ensures
clean and sapid water in the fresh water tank.
The plant's functions and cleaning capacities must be
checked regularly (see chapter MAINTENANCE).
This manual must be fully read and understood before
using the plant.
Despite all effort, we cannot guarantee that heavily
polluted water such as in industral ports or near in-
tense agriculture will be 100% cleansed. The plant's
operator is responsible for monitoring the cleaning
capacity and changing the plant's filters and dia-
phragm if needed. Furthermore, the operator must
ensure periodic use of the rinse cycle and may need
to inspect the produced water in case of doubt. There
are special test sets or certified test laboratories (for
commercial use) for the latter.
aquonic | User Manual
29