Attaching And Removing The Display - Gazelle Xtra Bedienungsanleitung

4.2 Attaching and removing the display

The separate display supplied can be simply attached to the
display holder. The display holder can be attached either left,
right or in the middle of your handlebars.
Attaching and moving the display holder
• The display holder is adjustable and can be positioned
however you want it, using the four screws (ill. 24+25).
• Use the outer screws to clamp the display holder on the
handlebars and change the horizontal position of the
display. By loosening the outer two screws, for example,
you can position the display higher or lower on the
handlebars (ill. 26).
• The inner screws can be used to tilt the display to the
position of your choice (ill. 27).
• Loosen all four screws to remove the display holder from
the handlebars and then reattach it in the position of
your choice (ill. 28).
4. The display
24
25
26
27
28
69