Preparing Hot Water For Drinks - Zelmer ZCM8121 MAESTRO BARISTA Benutzerhandbuch

3. To prepare only one cup, touch the icon
lower cup will light up.
4. To prepare two cups, touch the same icon again. Indicator on the
upper cup will light up as well.
NOTE: take into account that it is not possible to prepare two cups if
ground coffee is used.
5. Touch the icon repeatedly to change the prese-
lected strength.
6. If you want to use grounded coffee poured into the ground coffee com-
partment lid (12), touch the icon
spoon icon will light up. Then, pour ground coffee in the compartment .
7. If you want to change the preselected water volume, touch
the icon repeatedly.
8. Touch the icon . Coffee preparation will start.
9. During preparation, indicators of the icon
10. Touch the icon to stop preparation at any time.
11. Once preparation process has finished, all the indica-
tors of the icons will light up permanently.
12. Wait until coffee stops flowing from the nozzles before removing the cups.
Note: the coffee maker will store the last settings of coffee strength and water volume.
54
once. Indicator on the
for 3 seconds. Indicator of the
will flash.

4.5. Preparing hot water for drinks)

1. Place a cup underneath the hot water outlet nozzle.
2. Touch the icon to switch the coffee maker on. Wait until automatic
rinsing process is finished.
3. Touch the icon once. Indicator will light up.
4. Touch the icon
to select water quantity to be pre-
pared .
5. Touch the icon . Water preparation will start.
6. During preparation, indicator of the icon
7. Touch the icon to stop preparation at any time.
8. Once preparation process has finished, all the indicators
of the icons will light up permanently.
9. Wait until water stops flowing from the nozzles before removing the cup.
Note: the coffee maker will store the last setting of water volume.
will flash.
55