Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Wait some seconds until the indicator of the icon
manently.
5. Insert the drip tray into the coffee maker. Make sure it is fit-
ted correctly. The indicator of the icon
5.3. Cleaning the brewing unit
To keep the right function of your coffee maker for a long time, it is very important that brewing
unit is cleaned frequently.
Important: do not wash the brewing unit in the dishwasher
Proceed as indicated below:
1. Touch the icon
to switch the coffee maker off.
2. Unplug the coffee maker from the mains to prevent from electric and
mechanical hazards and let it cool down!
3. Remove the water tank (6). Take it from the handle (7) and pull it
out..
4. Open the door (8) of the compartment where the brewing unit (9) is lo-
cated.
5. Turn the wheel of the brewing unit counter clockwise to unlock it.
6. Take the brewing unit out.
7. Hold the brewing unit over a sink and wash it using water from the
tap.
58
remains lit per-
will go off.
8. Pay special care to wash the filters
9. Then, let the brewing unit air-dry. Do not use cloths for drying the
brewing unit, as fibres could block internal pipes!
10. Insert the brewing unit into the coffee maker, until you a click is heard
indicating that it is correctly fitted (very important!).
11. Close the door of the compartment.
12. Insert the water tank into the coffee maker. Make sure it is fitted co-
rrectly.
13. Then, plug the coffee maker to the mains again.
5.4. Cleaning ground coffee inlet
After a long period of use, internal walls of ground coffee inlet could get blocked due to coffee
powder residues stuck on them. It is very important that inlet is cleaned frequently.
Proceed as indicated below:
1. Remove the brewing unit as indicated in section "Cleaning the brewing unit".
2. Open ground coffee compartment lid (12). Use a brush to remo-
ve the coffee powder residues stuck on inlet wall. Residues will be
collected in the drip tray.
3. Insert the brewing unit.
59
Werbung
Inhaltsverzeichnis
Fehlerbehebung
