Aquacontrol Basic Exact pH/Rx Bedienungsanleitung Seite 32

In MENU MODE all essential parameters can be changed and the pH probe can be
calibrated.
The following settings can be made in the menu sub-items:
pH: target value
7.2
pH: P value -1.00
pH: Limit 120 min.
pH: Calibration
Rx: Target value
650mV
Rx: P value 100 mV
Rx: Limit 120 min.
If the MENU mode is not left within 5 minutes, the system automatically returns to
normal operating mode. The changed parameters are saved.
By pressing the MODE button
for 4 seconds you get to the
MENU mode.
MODE
With a short press of the MODE button,
you switch the sub-items.
Using the arrow keys you can
change the individual values.
By pressing the MODE button for
2 seconds you leave the MENU mode and
MODE
the values are saved.
32