Other Displays In Operating Mode; Menu Mode / Change Of Parameters - Aquacontrol Basic Exact pH/Rx Bedienungsanleitung

2.1.2 Other displays in operating mode

• "Limit" when the dosing time is exceeded
If the display Limit appears, the dosing time has been exceeded and the safety
shutdown for the corresponding parameter is activated.
Limit
The display alternates with the respective measured values every 2 seconds.
Pressing the MODE button deactivates the Limit state.
When the power is switched off, the unit remembers the states Dosing:
ON / OFF or LIMIT pH or Redox.
• "Level" for suction lances with automatic level switch-off
(option connection and suction lance)
If the Level display appears, the respective container is empty. The container
must be replaced. Dosing continues automatically when the container is full.
Level
• Dosing [ON / OFF]
In operating mode, the dosing can be switched on or off by briefly pressing the
MODE button.
When dosing is switched off, the display alternates between the currently
measured values and the "Stop" display at 2-second intervals.
pH: 7.2
When the power is switched off, the unit remembers the states Dosing:
ON / OFF or LIMIT pH or Redox.
3

MENU MODE / Change of parameters

Rx: 650mV
Rx: 650mV
Rx: 650mV
31
pH: 7.2 Limit
pH: 7.2 Level
Stop Stop