Vermeiren Gemini 2 Gebrauchsanweisung Seite 11

3.2.4 Footrest inclination
3.2.5 Footrest length (only for seat width 32)
3.2.6 Foot supports (optional)
The angle of the foot supports (10) can be adjusted in several positions (Seat width 32: 5 positions,
10° steps – Seat width 40: 4 positions, 8,5° steps)
1. Loosen the wing nuts (11) on het bottom of the footplate.
2. Turn the foot supports (10) in the desired position.
3. Retighten the wing nuts (11).
4. Make sure that the foot supports are firmly fixated.
32
8
The footrest can be set into 4 different lengths (steps
of 30 mm):
1. Retract both blocking pins (9).
2. Slide the footplate up/down to the desired
9
3. Block the undercarriage again with the blocking
4. Make sure the footplate is firmly fixated.
10
11
1. Loosen the levers (8) on both sides.
2. Adjust the footrest to the desired position
(stepless; range 83° for seat width 32, range
85° for seat width 40).
3. Retighten both levers (8).
4. Make sure that the footrest is firmly fixated.
position.
pins (9).
40
11
9
Gemini 2
2021-06
Using your wheelchair
10
EN
NL