Intended Use; Ec Declaration Of Conformity - Makita SD100D Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Length of stroke
Strokes per minute
Maximum cutting capacities
Rated voltage
Standard battery cartridges
Overall length
Net weight
•
Due to our
the specifications
notice.
•
Specifications and
country.
•
Weight, with

Intended use

This tool is
plunge-cutting of
Wood can also be cut by installing a suitable saw blade.
Noise
The typical A-weighted noise
determined according to 60745-2-11:
Sound pressure level (L
pA
dB(A)
Uncertainty (K) :
The noise level
may exceed 80
WARNING:
Wear ear protection.
Vibration
The vibration total
vector sum) determined according to 60745-
2-11:
Work mode: cutting drywall (thickness 30 mm)
Vibration emission (a ) :
h
Uncertainty (K) :
Work mode: cutting chip board (thickness 15 mm)
Vibration emission (a ) :
h
Uncertainty (K) :
Drywall
Wood
continuing program
herein
battery cartridge
battery cartridge, according to
intended for
a drywall.
level
) : 77
3 dB(A)
under working
dB (A).
value (tri-axial
3.0 m/s
1.5 m/s
5.5 m/s
1.5 m/s
BL1015, BL1020B
239 mm
1.5 kg
of research
are subject
may differ
NOTE: The
emission
measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The
emission
used in a preliminary assessment of exposure.
WARNING:
emission
the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
to protect the operator that are based on an
estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it
is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
The EC
conformity is
2 A to this instruction manual.
2
2
2
7 ENGLISH
SD100D
6 mm
-1
0 - 6,000 min
30 mm
15 mm
D.C. 10.8 V
BL1040B
248 mm
1.6 kg
and development,
to change
from country
EPTA-Procedure
declared vibration
value has
declared vibration
value may also be
The vibration
during actual
Be sure to identify safety measures
declaration of
included as
without
to
01/2003
been
use of
Annex